There are many reasons why individuals want to change the grout color on their Tile Floor.
Maybe one of these situations has happened to you...
"Help! I just installed a new tile floor in my kitchen and the grout color did not turn out as I thought it would. Am I
stuck with it?"
"My bathroom floor is stained and discolored in the grout around the toilet. Looks like rust stains. I can’t seem to
it no matter what I use. Any suggestions?"
"I'm getting ready to sell my house and my Realtor says that my bathroom floor looks dingy and dated. How can I update the
floor without replacing the whole thing?"
The answer to all of these questions is grout colorant and you don't have to be a professional to do the job. (A great DIY
project!) There are key steps to follow for good results such as read and adhere to directions on the product label, clean
and pretreat according to directions and be sure to allow enough drying time for each step of the process.
Your best bet is to buy a kit so you've got everything you need for the job. Aqua Mix has a Grout Colorant Kit that
in 24 different colors. The kit includes an 8oz. bottle of AquaMix Pre–Treatment Cleaner, 8oz. bottle of Aqua Mix Grout
Colorant, Grout Brush, and Scrub Pad. *Tip: You can mix colors if you want to customize.
Pre–treatment cleaner is the first critical step because it etches the surface of the grout and removes any finishes
or cleaners that may be on the grout allowing the colorant to adhere when it’s applied. *Tip: If pre–treatment cleaner
is not used as directed, grout colorant will not adhere well to the grout and may peel.
The Aqua Mix Grout Colorant goes on like paint with the grout brush and bonds to the surface of the grout (after the grout
has been pre–treated). The colorant contains a sealant so it seals the grout as it dries making future cleaning easier
and the grout less likely to hold stains. If you go outside the lines of the grout during application, you will have an
opportunity to wipe off excess grout colorant after 2 hours. The colorant is water–based so it cleans up easily and
doesn’t have a caustic odor. Do a test area on your floor before you tackle the whole job. The results of this test
help you determine the optimum time for the colorant to dwell on the tile before cleaning up. You may find that you need to
allow more than 2 hours before cleanup. *Tip: Don't scrub the grout lines during cleanup because Colorant is not completely
dry at this time.
The final results will last up to 15 years! Extreme weather conditions, harsh cleaning methods and high–alkaline or
solvent–based cleaners will affect wear so use a tile cleaner that is recommended for use on tile and doesn't contain
solvents such as Aqua Mix Concentrated Stone & Tile Cleaner.
Grout colorant is an effective solution to all of the scenarios mentioned above however if the grout is cracked or
chipped, the colorant is not the right answer. *Tip: Grout colorant only colors and will not correct any defects in the grout.
The amout of grout colorant required will vary depending on the width and porosity of the grout joint and the size of the
tiles and can range from 50 – 300 square feet per 8–oz bottle. Reference the coverage guide on
www.1877floorguy.com for the amount of grout colorant you'll need. You can also get a free color chart before you buy the colorant and get answers to your questions by calling toll–free at 1–877–floorguy
Have Fun Coloring!